2022 - 2023
Florida Department of Education
Curriculum Framework 

Program Title:	Motorcycle Service Technologies
Program Type:	Career Preparatory
Career Cluster:	Transportation, Distribution and Logistics

Secondary – Career Preparatory	
Program Number	9540500	
CIP Number	0647061101	
Grade Level	9-12	
Standard Length	8 credits	
Teacher Certification	Refer to the Program Structure section	
CTSO	SkillsUSA	
SOC Codes (all applicable) 	49-3052 – Motorcycle Mechanics	
CTE Program Resources 	http://www.fldoe.org/academics/career-adult-edu/career-tech-edu/program-resources.stml	

Purpose 

This program offers a sequence of courses that provides coherent and rigorous content aligned with challenging academic standards and relevant technical knowledge and skills needed to prepare for further education and careers in the Transportation, Distribution and Logistics career cluster; provides technical skill proficiency, and includes competency-based applied learning that contributes to the academic knowledge, higher-order reasoning and problem-solving skills, work attitudes, general employability skills, technical skills, and occupation-specific skills, and knowledge of all aspects of the Transportation, Distribution and Logistics career cluster. 

The content includes but is not limited to the motorcycle services technology industry, and demonstrates such elements of the industry as planning, management, finance, technical and production skills, underlying principles of technology, labor issues, community issues, and health, safety, and environmental issues.
 
Additional Information relevant to this Career and Technical Education (CTE) program is provided at the end of this document.

Program Structure

This program is a planned sequence of instruction consisting of eight credits.

To teach the course(s) listed below, instructors must hold at least one of the teacher certifications indicated for that course.

The following table illustrates the secondary program structure:

Course Number	Course Title	Teacher Certification	Length	SOC Code	Level	Graduation Requirement	
8766110	Motorcycle Service 1	MOTORCYCLE @7 7G	1 credit	49-3052	2		
8766120
8766130	Motorcycle Service 2 
Motorcycle Service 3 		1 credit
1 credit	49-3052	2
2		
8766140
8766150	Motorcycle Service 4
Motorcycle Service 5		1 credit
1 credit	49-3052	2
2		
8766160
8766170
8766180	Motorcycle Service 6
Motorcycle Service 7 
Motorcycle Service 8		1 credit
1 credit
1 credit	

49-3052	2
2
2		

(Graduation Requirement Abbreviations- EQ= Equally Rigorous Science, PA= Practical Arts, EC= Economics)

Common Career Technical Core – Career Ready Practices

Career Ready Practices describe the career-ready skills that educators should seek to develop in their students.  These practices are not exclusive to a Career Pathway, program of study, discipline or level of education.  Career Ready Practices should be taught and reinforced in all career exploration and preparation programs with increasingly higher levels of complexity and expectation as a student advances through a program of study. 

1. Act as a responsible and contributing citizen and employee. 

2. Apply appropriate academic and technical skills. 

3. Attend to personal health and financial well-being. 

4. Communicate clearly, effectively and with reason. 

5. Consider the environmental, social and economic impacts of decisions. 

6. Demonstrate creativity and innovation. 

7. Employ valid and reliable research strategies. 

8. Utilize critical thinking to make sense of problems and persevere in solving them. 

9. Model integrity, ethical leadership and effective management. 

10. Plan education and career path aligned to personal goals. 

11. Use technology to enhance productivity. 

12. Work productively in teams while using cultural/global competence. 

Standards

After successfully completing this program, the student will be able to perform the following:

01.0	Recognize personal and industry safety requirements.
02.0	Verify the proper use and care of basic shop tools and equipment.
03.0	Outline the appropriate set-up procedures.
04.0	Show proficiency in performing routine preventative maintenance services.
05.0	Compare and contrast the differences in the measurement systems, fasteners and thread repair.
06.0	Illustrate industry-related math skills.
07.0	Show proficiency in parts inventory identification and repair order processing. 
08.0	Perform basic services and minor repairs.
09.0	Perform basic frame and suspension service.
10.0	Perform basic electrical system service.
11.0	Diagnose, service and repair cooling systems.
12.0	Diagnose, repair and recondition basic engine components.
13.0	Apply industry-related science to motorcycle service.
14.0	Diagnose, service and repair frames and suspension components.
15.0	Diagnose, service and repair wheels, tires, and brakes.
16.0	Diagnose, service and repair drive trains.
17.0	Diagnose, service and repair fuel and exhaust systems.

2022 - 2023
Florida Department of Education
Student Performance Standards

Course Title: 	Motorcycle Service 1 
Course Number: 	8766110
Course Credit:	1

Course Description:
The Motorcycle Service 1 course prepares students for entry into the motorcycle service industry. Students explore career opportunities and requirements of a professional motorcycle mechanic. Students study safety requirements, tools and equipment, set-up procedures, and routine preventative maintenance.

CTE Standards and Benchmarks	
01.0	Recognize personal and industry safety requirements.--The student will be able to:	
01.01	List the federal and state standards for health and safety, including OSHA and the Federal Law as recorded in (29 CFR-1910.1200).	
01.02	Outline the safety requirements for shop organization and management.	
01.03	Recognize the safety requirements for the use of industry tools and equipment.	
01.04	List the fire-safety precautions.	
01.05	Recognize electrical-safety precautions.	
02.0	Verify the proper use and care of basic shop tools and equipment.--The student will be able to:	
02.01	Categorize general and specialized hand tools.	
02.02	Examine and use power tools.	
02.03	Classify and use fasteners.	
02.04	Document proper use of air tools.	
02.05	Utilize oxy-acetylene welding outfit for heating, welding, brazing and cutting.	
02.06	Use heating devices to perform service procedures.	
03.0	Outline the appropriate set-up procedures.--The student will be able to:	
03.01	Inspect and interpret vehicle identification number information.	
03.02	Inspect tires; check and adjust air pressure.	
03.03	Check for proper fluid levels.	
03.04	Utilize electrical test equipment to isolate defective components and check lamp circuits.	
03.05	Inspect and fill battery.	
03.06	Clean engine.	
03.07	Install cables, hoses and electrical assemblies.	
03.08	Inspect cables, connectors, clamps and hold-downs; adjust as necessary.	
03.09	Read and interpret a wiring diagram.	
03.10	Troubleshoot and repair wiring harnesses.	
04.0	Show proficiency in performing routine preventative maintenance services.--The student will be able to:	
04.01	Compare and contrast typical motorcycle lubricants and lubricant properties.	
04.02	Inspect and test head and tail lamp circuits; aim headlights and replace bulbs.	
04.03	Inspect battery terminals and the state-of-charge test; perform slow/fast battery charge.	
04.04	Inspect and clean battery cables, connectors, clamps and hold-downs; repair or replace as needed.	
04.05	Inspect and test fusible links, circuit breakers and fuses; replace as needed.	
04.06	Check radiator coolant level (if applicable), test and add coolant.	
04.07	Check fluid levels and change fluids and the tightness of the oil filters.	

2022 - 2023
Florida Department of Education
Student Performance Standards

Course Title: 	Motorcycle Service 2 
Course Number: 	8766120
Course Credit:	1

Course Description:
The Motorcycle Service 2 course is designed to build on the skills and knowledge students learned in Motorcycle Service 1 for entry into the motorcycle service industry. Students explore career opportunities and requirements of a professional motorcycle mechanic. Students study measurement systems, fasteners, thread repair, and math.

CTE Standards and Benchmarks	
05.0	Compare and contrast the differences in the measurement systems, fasteners and thread repair.--The student will be able to:	
05.01	Describe and distinguish the different types of measurement systems.	
05.02	Compare and contrast the different types of fasteners.	
05.03	Explain the steps of inspecting, cleaning and replacement of broken fasteners.	
05.04	Describe the sequence of tightening and torqueing fasteners to specs.	
05.05	Compare and contrast the different stress fractures of fasteners	
06.0	Illustrate industry-related math skills.--The student will be able to:	
06.01	Measure tolerance(s) using millimeters and inches.	
06.02	Perform metric to SAE (and SAE to metric) conversions.	
06.03	Perform correct measurements using different precise metering tools. T handle measuring tool.	
06.04	Perform correct measures using Vernier Calipers.	
06.05	Perform correct measures using Micrometers.	

2022 - 2023
Florida Department of Education
Student Performance Standards

Course Title: 	Motorcycle Service 3 
Course Number: 	8766130
Course Credit:	1

Course Description:
The Motorcycle Service 3 course is designed to build on the skills and knowledge students learned in Motorcycle Service 1 & 2 for entry into the motorcycle service industry. Students explore career opportunities and requirements of a professional motorcycle mechanic. Students study parts inventory, repair ordering, basic services and minor repairs, basic frame, and suspension.

CTE Standards and Benchmarks	
07.0	Show proficiency in parts inventory identification and repair order processing.--The student will be able to:	
07.01	Read and interpret information in parts and service manuals and other technical media.	
07.02	Read and understand graphs, charts, diagrams and tables commonly used in the industry.	
07.03	Write and process work orders.	
07.04	Prepare cost estimates for jobs using service and flat-rate standards.	
07.05	Perform basic parts inventory tracking with the latest computer updates.	
07.06	Interpret and verify complaint; determine needed repairs. If find more than first estimated ask customer if ok to do repairs.	
08.0	Perform basic services and minor repairs.--The student will be able to:	
08.01	Identify, select and use appropriate replacement parts.	
08.02	Clean or replace after inspection of air filtration.	
08.03	Service and check batteries, if not charging then replace.	
08.04	Service lubrication systems.	
08.05	Name the components of air and liquid cooling systems by name and function.	
08.06	Remove, remount and balance tires.	
08.07	Diagnose, service and repair chain and belt final drive components.	
09.0	Perform basic frame and suspension service.--The student will be able to:	
09.01	Categorize the different front- and rear-suspension systems and explain their operation.	
09.02	Compare the parts and functions of different frames and suspension systems.	
09.03	Explain how wheels, tires and suspension affect chassis performance and ride-ability.	
09.04	Replace and true a wheel assembly.	
09.05	Diagnose and service wheel bearings and seals.	

2022 - 2023
Florida Department of Education
Student Performance Standards

Course Title: 	Motorcycle Service 4 
Course Number: 	8766140
Course Credit:	1

Course Description:
The Motorcycle Service 4 course is designed to build on the skills and knowledge students learned in Motorcycle Service 1, 2 & 3 for entry into the motorcycle service industry. Students explore career opportunities and requirements of a professional motorcycle mechanic. Students study electrical system services.

CTE Standards and Benchmarks	
10.0	Perform basic electrical system service.--The student will be able to:	
10.01	Assess and use basic electrical system test equipment.	
10.02	Use basic DC electrical theory to select appropriate test procedures.	
10.03	Inspect and test fusible links, circuit breakers and fuses; replace as needed.	
10.04	Check electrical circuits with a test light; determine needed repairs.	
10.05	Troubleshoot and repair battery-operated electronic ignition systems.	
10.06	Troubleshoot and repair magneto-ignition systems.	
10.07	Troubleshoot and repair capacitive-discharge-ignition (CDI) systems.	
10.08	Troubleshoot and repair half-wave and full-wave charging systems.	
10.09	Troubleshoot and repair three-phase charging systems.	
10.10	Troubleshoot and repair electrical starter systems.	
10.11	Troubleshoot and repair Direct-Current (DC) Generators.	
10.12	Troubleshoot and repair Warning systems.	

2022 - 2023
Florida Department of Education
Student Performance Standards

Course Title: 	Motorcycle Service 5 
Course Number: 	8766150
Course Credit:	1

Course Description:
The Motorcycle Service 5 course is designed to build on the skills and knowledge students learned in Motorcycle Service 1, 2, 3 & 4 for entry into the motorcycle service industry. Students explore career opportunities and requirements of a professional motorcycle mechanic. Students study diagnostics, service, and repair of cooling systems, and engine components.

CTE Standards and Benchmarks	
11.0	Diagnose, service, and repair cooling systems.--The student will be able to:	
11.01	Categorize the components of air and liquid cooling systems by name and function.	
11.02	Diagnose service and repair air-cooling systems.	
11.03	Diagnose service and repair liquid cooling systems.	
12.0	Diagnose, repair and recondition basic engine components.--The student will be able to:	
12.01	Explain the engine operating theory.	
12.02	Recondition a two-stroke engine top-end.	
12.03	Recondition a single-cylinder four-stroke engine top-end.	
12.04	Recondition a multi-cylinder four-stroke engine top-end.	
12.05	Rebuild a four-stroke head.	
12.06	Recondition a single-cylinder four-stroke engine bottom-end.	
12.07	Recondition a multi-cylinder four-stroke engine bottom-end.	
12.08	Recondition a two-stroke engine bottom-end.	
12.09	Service a plain-bearing crankshaft.	
12.10	Diagnose and repair oil-delivery systems.	

	2022 - 2023
Florida Department of Education
Student Performance Standards

Course Title: 	Motorcycle Service 6 
Course Number: 	8766160
Course Credit:	1

Course Description:
The Motorcycle Service 6 course is designed to build on the skills and knowledge students learned in Motorcycle Service 1, 2, 3, 4, & 5 for entry into the motorcycle service industry. Students explore career opportunities and requirements of a professional motorcycle mechanic. Students study the science of motorcycles, frames, and suspension systems.

CTE Standards and Benchmarks	
13.0	Apply industry-related science to motorcycle service.--The student will be able to:	
13.01	Explain how temperature extremes, chemical reactions and moisture content affect motorcycle systems.	
13.02	Draw conclusions or make inferences from data.	
14.0	Diagnose, service, and repair frames and suspension components.--The student will be able to:	
14.01	Service and repair front suspension.	
14.02	Service and repair rear suspension.	
14.03	Inspect, remove, and replace frames.	

2022 - 2023
Florida Department of Education
Student Performance Standards

Course Title: 	Motorcycle Service 7 
Course Number: 	8766170
Course Credit:	1

Course Description:
The Motorcycle Service 7 course is designed to build on the skills and knowledge students learned in Motorcycle Service 1, 2, 3, 4, 5, & 6 for entry into the motorcycle service industry. Students explore career opportunities and requirements of a professional motorcycle mechanic. Students study wheels, tires, and brakes.

CTE Standards and Benchmarks	
15.0	Diagnose, service, and repair wheels, tires and brakes.--The student will be able to:	
15.01	Diagnose and repair mechanical disc and drum brake systems and components.	
15.02	Diagnose and repair hydraulic disc and drum brake systems and components.	
15.03	Diagnose and repair ABS braking systems and other advanced stopping systems.	

2022 - 2023
Florida Department of Education
Student Performance Standards

Course Title: 	Motorcycle Service 8 
Course Number: 	8766180
Course Credit:	1

Course Description:
The Motorcycle Service 8 course is designed to build on the skills and knowledge students learned in Motorcycle Service 1, 2, 3, 4, 5, 6, & 7 for entry into the motorcycle service industry. Students explore career opportunities and requirements of a professional motorcycle mechanic. Students study drive trains, fuel, and exhaust systems.

CTE Standards and Benchmarks	
16.0	Diagnose, service, and repair drive trains.--The student will be able to:	
16.01	Diagnose, service, and repair primary-drive systems.	
16.02	Diagnose, service, and repair clutch assemblies.	
16.03	Diagnose, service, and repair transmissions.	
16.04	Diagnose, service, and repair shaft drives.	
16.05	Diagnose and repair kick-start systems.	
17.0	Diagnose, service, and repair fuel and exhaust systems.--The student will be able to:	
17.01	Identify components and operation of carburetion and fuel-injection systems.	
17.02	Diagnose service and repair slide-type carburetors.	
17.03	Diagnose service and repair constant-velocity-type (CV-type) carburetors.	
17.04	Diagnose service and repair fixed Venturi carburetors.	
17.05	Diagnose service and repair fuel-injection systems.	
17.06	Diagnose service and repair exhaust systems replace necessary components as needed.	
17.07	Diagnose service and repair other fuel-delivery-system components.	

Additional Information

Laboratory Activities

Laboratory investigations that include scientific inquiry, research, measurement, problem solving, emerging technologies, tools and equipment, as well as, experimental, quality, and safety procedures are an integral part of this career and technical program/course. Laboratory investigations benefit all students by developing an understanding of the complexity and ambiguity of empirical work, as well as the skills required to manage, operate, calibrate and troubleshoot equipment/tools used to make observations. Students understand measurement error; and have the skills to aggregate, interpret, and present the resulting data. Equipment and supplies should be provided to enhance hands-on experiences for students.

Academic Alignment

Secondary Career and Technical Education courses are pending alignment to the B.E.S.T.  (Benchmarks for Excellent Student Thinking) Standards for English Language Arts (ELA) and Mathematics that were adopted by the State Board of Education in February 2020.  Academic alignment is an ongoing, collaborative effort of professional educators that provide clear expectations for progression year-to-year through course alignment. This initiative supports CTE programs by improving student performance through the integration of academic content within CTE courses.  

Florida Standards for English Language Development (ELD)
English language learners communicate for social and instructional purposes within the school setting. ELD.K12.SI.1.1 

English Language Development (ELD) Standards Special Notes:
Teachers are required to provide listening, speaking, reading and writing instruction that allows English language learners (ELL) to communicate for social and instructional purposes within the school setting.   For the given level of English language proficiency and with visual, graphic, or interactive support, students will interact with grade level words, expressions, sentences and discourse to process or produce language necessary for academic success. The ELD standard should specify a relevant content area concept or topic of study chosen by curriculum developers and teachers which maximizes an ELL’s need for communication and social skills. To access an ELL supporting document which delineates performance definitions and descriptors, please click on the following link: http://www.cpalms.org/uploads/docs/standards/eld/SI.pdf.
For additional information on the development and implementation of the ELD standards, please contact the Bureau of Student Achievement through Language Acquisition at sala@fldoe.org.

Career and Technical Student Organization (CTSO)

SkillsUSA is the intercurricular career and technical student organization for providing leadership training and reinforcing specific career and technical skills.  Career and Technical Student Organizations provide activities for students as an integral part of the instruction offered.  

Cooperative Training – OJT

On-the-job training is appropriate but not required for this program.  Whenever offered, the rules, guidelines, and requirements specified in the OJT framework apply. 

Accommodations

Federal and state legislation requires the provision of accommodations for students with disabilities as identified on the secondary student’s Individual Educational Plan (IEP) or 504 plan or postsecondary student’s accommodations’ plan to meet individual needs and ensure equal access. Accommodations change the way the student is instructed. Students with disabilities may need accommodations in such areas as instructional methods and materials, assignments and assessments, time demands and schedules, learning environment, assistive technology and special communication systems. Documentation of the accommodations requested and provided should be maintained in a confidential file.

In addition to accommodations, some secondary students with disabilities (students with an IEP served in Exceptional Student Education (ESE)) will need modifications to meet their needs. Modifications change the outcomes or what the student is expected to learn, e.g., modifying the curriculum of a secondary career and technical education course. Note: postsecondary curriculum and regulated secondary programs cannot be modified.

Some secondary students with disabilities (ESE) may need additional time (i.e., longer than the regular school year), to master the student performance standards associated with a regular course or a modified course.  If needed, a student may enroll in the same career and technical course more than once.  Documentation should be included in the IEP that clearly indicates that it is anticipated that the student may need an additional year to complete a Career and Technical Education (CTE) course.  The student should work on different competencies and new applications of competencies each year toward completion of the CTE course.  After achieving the competencies identified for the year, the student earns credit for the course.  It is important to ensure that credits earned by students are reported accurately.  The district’s information system must be designed to accept multiple credits for the same course number for eligible students with disabilities.

Additional Resources

For additional information regarding articulation agreements, Bright Futures Scholarships, Fine Arts/Practical Arts Credit and Equivalent Mathematics and Equally Rigorous Science Courses please refer to:

http://www.fldoe.org/academics/career-adult-edu/career-tech-edu/program-resources.stml